Pendular Spreader PDV-PDHV models
5
2.2. INFORMATION ON THE MACHINE
The models introduced in this manual have been designed and made exclusively allowing the
distribution of solid, granular fertilizers and of seeds in the field. The machine is not indicated for
being used in different sectors from the agricultural one.
These machines are usually used during the day. If it is required the nocturnal use or with
poor visibility, it must use the lighting system of the tractor or of the equipment to which the
machine is connected.
A different use, like the above mentioned one is considered improper.
Any arbitrary modification made to this machine relieve the manufacturer from any responsibility for
damages or lesions, also serious, that can be caused to the operators, to third parties or to things.
2.2.1..
NAME PLATE
On the hopper of every machine, a name plate is fixed showing the model, the number of series and
the year of construction of the machine.
When some spare parts are required, it is always necessary to refer to the type of machine, to the
serial number and to the manufacturing year.
Location of the name plate on the machine
2.2.2.
CHARACTERISTICS OF THE MACHINE
The great spreading precision of these kind of fertlizer spreaders lets them to be used in different
applications, both for specific cultivations and in golf courses.
The Cosmo series of pendular spreaders can rely on a huge range of models adaptable with tractors
of any power.
The upper parts of the gear box are made in polyethylene in order to increase its long life to the
corrosion.
The standard spout allows to get a spreading width from 8 m to 14 m that can be modified according
to the needs and the type of fertilizer used.
The gear box can be set to 3 reduction spreading patterns (see par. 5.1.1) by turning the width
adjustment key.
To Next Page
Loading...
Need help?
General
