To Next PageTo Next PageWhy is my Costway EP23048 Air Conditioner not working?
Your Costway Air Conditioner might not be working due to several reasons: * It's not connected to a live socket, so ensure it's plugged in and turned on. * The water tank is full, indicated by the full water indicator. Drain the water. * The ambient temperature is too low. This unit is recommended for use between 41-95?.
What to do if my Costway EP23048 Air Conditioner cooling or heating is bad?
If your Costway Air Conditioner isn't cooling or heating effectively, consider these possibilities: * Direct sunlight is entering the room. Try drawing the curtains. * Doors and windows are open, the room is crowded, or there are heat sources. Close doors and windows, and consider adding more air conditioners. * The filter mesh is dirty. Clean or replace it. * The air inlet or outlet is blocked. Remove any obstructions.
Why is my Costway EP23048 compressor not working?
The compressor of your Costway Air Conditioner might not be working due to the initiation of overheat protection. Wait 3 minutes until the temperature decreases, and then turn the unit on.
What to do if my Costway EP23048 Air Conditioner is making a large noise?
If your Costway Air Conditioner is making a lot of noise, it might not be placed on a flat surface. Put the air conditioner in a flat and firm place, which may reduce the noise.
What does it mean when the full water indicator illuminates on Costway Air Conditioner?
When the full water indicator illuminates on your Costway Air Conditioner, it means the water in the base plate of the unit has reached the full water level. You need to drain the water in the base plate.
What to do if the remote control of Costway EP23048 does not work?
If the remote control for your Costway Air Conditioner isn't working, try these steps: * Move closer to the air conditioner, ensuring the remote points toward the receiving head. * Replace the batteries, as they may be depleted.
What does E4 mean on my Costway EP23048?
If your Costway Air Conditioner displays 'E4', it indicates anti-freeze protection is active. The functions will restore automatically once defrozen.
What does E1 mean on Costway EP23048 Air Conditioner?
If your Costway Air Conditioner displays 'E1', it indicates a pipe temperature sensor failure. Check the pipe temperature sensor and related circuits.
What does E2 mean on Costway EP23048 Air Conditioner?
If your Costway Air Conditioner displays 'E2', it means there is a room temperature sensor failure. Check the room temperature sensor and related circuits.
Highlights new appearance, compact structure, user-friendly remote, and design protections.
Diagram and list of all components of the air conditioner unit.
Guide for connecting the heat exhaust hose to the unit's back shell.
Connecting the heat exhaust hose to the lower air duct bottom.
Installing the window board for heat exhaust ventilation.
Steps for draining water manually from the unit's base plate.
Instructions for setting up continuous water drainage using a hose.
How to clean the exterior surface of the air conditioner.
Procedure for cleaning and reinstalling filter frames and meshes.
Proper methods for lifting and moving the air conditioner unit.
Technical specifications for the unit's fuse.
Diagram illustrating the internal components and connections of the air conditioner.
General| Brand | Costway |
|---|---|
| Model | EP23048 |
| Category | Air Conditioner |
| Language | English |
