Need help?Do you have a question about the Cotek S600 Series and is the answer not in the manual?
General safety guidelines to prevent hazards during inverter operation, including protection from water, dust, and proper wiring.
Safety measures when working with batteries, such as avoiding sparks, metal tools, and handling acid exposure.
Lists various applications for the pure sine wave inverter, including power tools, office equipment, and home electronics.
Details the technical specifications of the inverter, such as output power, input/output voltage, frequency, efficiency, and protection features.
Provides dimensional information and visual representation of the inverter's physical layout and connections.
Explains the function of the front panel controls and indicators, including the ON/OFF switch and LED status displays for input and load levels.
Describes the rear panel components and connections, including DC input terminals, chassis ground, and remote control port (S600R model).
Outlines the environmental and safety requirements for installing the power inverter, emphasizing dry, cool, safe, and ventilated conditions.
Provides step-by-step guidelines for connecting the inverter and performing initial performance checks, including safety warnings for connections.
Details the importance and procedures for AC safety grounding, including neutral grounding requirements for 120V and 230V models.
Explains the correct procedure for connecting DC battery cables to the inverter, emphasizing cable gauge, length, and the necessity of an inline fuse on the positive cable.
Guides the user on how to operate the inverter, including turning it on/off, managing multiple loads, and understanding input voltage ranges and indicators.
Declaration of conformity to CE directives, specifying compliance with Electromagnetic Compatibility Directive (89/336/EEC) and relevant standards.
Declaration of conformity to FCC Part 15 Rules for Class B equipment, ensuring it does not cause harmful interference.
Documentation related to the e-mark approval (e13 020866) for vehicle components, indicating compliance with relevant regulations.
Notice of completion of UL investigation and authorization to apply the UL Mark, confirming compliance with UL458 standards.
General| Surge Rating | 1200W |
|---|---|
| Waveform | Pure Sine Wave |
| THD | < 3% |
| Input Voltage | 12V/24V/48V DC |
| Output Power | 600W |
| Output Frequency | 50Hz/60Hz |
| Operating Temperature | -20°C to +50°C |
| Weight | 1.8 kg |
| Cooling | Fan |
| Protection Features | Overload, Over Temperature, Short Circuit, Low Battery Alarm/Shutdown |
To Next Page
