What to do if the power light on my Cotek S Series is blinking red steadily?
If the power status light on your Cotek Inverter is blinking red steadily, this typically indicates a short circuit, wiring error, or overload. You should check the AC wiring for any short circuits and remove any excessive load connected to the inverter.
How to fix a Cotek Inverter when the power light is blinking red fast?
If the power status light on your Cotek Inverter is blinking red fast, it indicates an over input voltage. You should check the input voltage and discharge the battery.
What to do if the power light on my Cotek Inverter is blinking red slowly?
If the power status light on your Cotek Inverter is blinking red slowly, it means the input voltage is low. You should charge the battery and check the connections and cable.
General| Input Voltage | 12V / 24V / 48V DC |
|---|---|
| Output Frequency | 50 Hz / 60 Hz |
| THD | < 3% |
| Operating Temperature | -20°C to +50°C |
| Waveform | Pure Sine Wave |
| Cooling | Fan cooling |
| Protections | Overload, over temperature, short circuit |
| Dimensions | Varies by model |
| Weight | Varies by model |
To Next Page
