Operator’s Manual
20969 CRT Tiller
16 For additional information email info@ardisam.com or call 800-345-6007 M-F 8-5
Servicing The Rototiller
The following information will help you make the necessary checks and perform the procedures required to follow the normal
care recommendations made for your rototiller.
If you prefer, your local authorized dealer can make these checks and perform the required procedures for you.
Important: Use only approved CountyLine spare parts.
MAINTENANCE
Maintenance Schedule
Your rototiller has been designed and produced by the industry’s leading manufacturer of outdoor power equipment to provide
you years of reliable operation.
Keeping your tiller in top running condition will prolong its life, and help you obtain optimum performance.
Please read this normal care schedule, and note the recommended care operating intervals to extend the life of your unit.
Maintenance Operation Page
Before
Each Use
50 hours or
Every Season
Change forward belt 17 X
Engine maintenance 18, EM X X
Check or ll engine crankcase 19 ,EM X X
Check tiller transmission grease 18 X
Check tire pressure 19 X
Lubrication 19 X
Clean tine axle shaft 19 X
Lubricate wheel axle shaft 19 X
EM = See engine manual
TO PREVENT ACCIDENTAL STARTING:
ENGINE MUST BE TURNED OFF AND COOL, AND SPARK
PLUG WIRE MUST BE REMOVED AND SECURED FROM
SPARK PLUG BEFORE CHECKING AND ADJUSTING
ENGINE OR EQUIPMENT.
PLUG
WIRE
WARNING
ENGINE AND SURROUNDING PARTS BECOME
EXTREMELY HOT DURING NORMAL USE.
TEMPERATURE OF MUFFLER AND NEARBY AREAS
MAY EXCEED 150° F. THESE AREAS. WILL CAUSE
SERIOUS BURN INJURIES IF TOUCHED BEFORE THE
ENGINE HAS COOLED.
WARNING
To Next Page
Loading...
