coval PSA 100 B - User Manual

Directions for use (V06-07)
Electronic vacuum switch PSA 100 B
Sté COVAL SAS
ZA des Petits Champs
26120 MONTELIER
Tel +33 (0) 4 75 59 91 91
Fax +33 (0) 4 75 59 91 05
http://www.coval.com
e-mail: coval@coval.com
Page 1 / 3
COVAL S.A.S.
ZA des Petits-Champs
26120 Montélier.
France
Tel : 04.75.59.91.91
Fax : 04.75.59.91.05
Email : coval@coval.com
1. Display:
Mode key Selection of the different modes
Keys +/- Changement of the differnet adjustments
LED output 1 & 2 Indicates the state of the contact output
2. Contact output 1 adjustment
Display
The display is alternating between “h1” and the adjusted value.
h1
07
To adjust the threshold of output 1, push the “mode” key 1
time.
1 x M
- 1
The display is alternating between “H1” and the adjusted value.
H1
46
To change this adjustment, push “+/-” keys until the requested
value is displayed.
+
-
H1
75
After 5 seconds, thechosen value registers automatically and
the screen returns to the vacuum display.
or
Wait
5s
75
To adjust the hysteresis h1, push the mode key.
1 x M
h1
07
To change this adjustment, push “+/-” keys to display the
requested value.
+
-
h1
10
After 5 seconds, the chosen value registers automatically and
the screen returns to the vacuum display.
or
Wait
5s
75
To adjust output 1configuration, push the “mode” key.
1 x M
To change this adjustment, push “+/-” keys. NO or NC are
displayed. (NO on standard basis).
+
-
NO
After 5 seconds, the chosen value registers automatically and
the screen returns to the vacuum display.
Wait
5s
75
Mode
+
-

Summary

Display Overview

Mode Key Functionality

Explains the function of the mode key in selecting different operational modes.

Keys +;- Functionality

Describes the role of +/- keys in changing adjustments.

LED Output Indicators

Details the indication of contact output states by LED 1 and 2.

Contact Output 1 Adjustment

Adjusting Output 1 Threshold

Steps to set the threshold value for output 1 using mode and +/- keys.

Adjusting Output 1 Hysteresis

Process for adjusting the hysteresis value (h1) for output 1.

Configuring Output 1

How to set output 1 to NO or NC configuration using mode and +/- keys.

Contact Output 2 Adjustment

Adjusting Output 2 Threshold

Steps to set the threshold value for output 2 using mode and +/- keys.

Adjusting Output 2 Hysteresis

Process for adjusting the hysteresis value (h2) for output 2.

Configuring Output 2

How to set output 2 to NO or NC configuration using mode and +/- keys.

Settings Locking and Unlocking

Activate Settings Lock

Activate lock (LC) via mode and - keys simultaneously for 3 sec.

Deactivate Settings Lock

Deactivate lock (UC) via mode and - keys simultaneously for 3 sec.

Display Rotation

Rotate Display 180°

Rotate display by 180° using the + and - keys for at least 3 seconds.

Factory Settings Management

Reprogram Factory Settings

Reset device to factory settings (PO) via mode and + keys for 5 seconds.

Preset Values Summary

Output 1 Preset Values

Details on H1, h1, and NO/NC configuration for Output 1.

Output 2 Preset Values

Details on H2, h2, and NO/NC configuration for Output 2.

Mounting Instructions

Component Mounting Guidelines

Instructions for manual mounting of the component; do not use tools.

coval PSA 100 B Specifications

General

Brand	coval
Model	PSA 100 B
Category	Switch
Language	English