Video Size – Set the video quality to your preferred
setting (WVGA, 720P, 1080P, 2.7K, 4K)
Video Length – Set the length of video you would like
taken each time the camera is triggered (5-60s)
Video Flash Power – Set your desired video flash power
(Low, Middle, High)
Screen 2: PIR
Trigger Mode
- PIR Trigger – Each time movement and heat
are detected, the camera will take an image
- Time lapse – By setting your time lapse
interval you are choosing the interval for
which your camera will take a picture.
- Both – If both is selected, your camera will
take an image each time movement is
detected, as well as, at each interval of the
timelapse
To Next Page
Loading...
