Rename – You can give your camera an 8-character
name.
Overwrite – When turned on, your camera will delete
the oldest image stored on the SD card when the
camera runs out of storage.
Format - Formatting your SD card clears everything off
the card. (It will delete any pictures that are stored on
the card!) We recommend formatting your SD card
every time before using your camera. Even if you have
a new SD card, you should always format the card
before you use it in the camera. To format, simply
select yes and press okay. Your screen will say “Please
Wait”, and then flash back to the menu screen. Once
you see the menu, your card has been formatted.
Default –
When you default the camera, it will take
the unit back to its factory settings
.
Software Version –
here is where you will find the
current firmware version that is on your camera.
To Next Page
Loading...
