PREPARATIONS
1. Open the front cover.
Open the front cover by pulling the lower part of it.
2. Take out lters and remove the plastic packing.
Remove the plastic packing of the lters except the pre-lter and then install lters according to
the order of lters.
Make sure to plug the power cord into the right Voltage outlet
before use.
Please Check Before Use!
- Make sure to remove each lter’s plastic packing before installing lters.
- The product is for household use. Use the product indoors only.
- When the product is not in use, remove the power plug from the electric outlet.
- When installing lters, check that the front side of lters is in the correct direction.
▶ Order of lters : UFY pre-lter → Medium deodorization lter
→ ANTI-FLU HEPA™ lter
How to install lter
Tips
To Next Page
Loading...
Need help?
General
