Tip
s
-
Always unplug the power before cleaning the filters.
-
The pre-filter can be reused after removing dust and cleaning with water.
-
If the pre-filter is not cleaned for a long time, the product performance
may decrease and problems may occur.
-
The tailored filter, deodorizing filter and HEPA filter cannot be reused after
cleaning. Never clean them with water.
■
Pre-filter (clean every 2-4 weeks)
1.
Pull the upper part of the front cover to open.
2.
Pull the pre-filter handle to take it out.
∗ Be careful that dust doesn't fall out during removal.
3. Remove dust with water or a vacuum cleaner depending on
the
degree of contamination
∗ Be careful not to let dust enter the purifier while cleaning.
4.
Push the completely dry pre-filter all the way into the purifier to install it. Close the front cover again.
▶
15
16
To Next Page
Loading...
Need help?
General
