6
English
INSTALLATION
1
Close main water supply valve to separate the faucet.
5
Connect it to voltage rating that matches it on the
rating plate. Then, open the feed valve to supply
water to the filtration system.
4
Connect ¼ inch orange tubing with the connector on
the adaptor.
Flush water through each filter at least 5 minutes before
Connection.
3
Connect the faucet with the adaptor.
Shall install the adaptor with connector on the cold
water pipe.
Do not turn the water pipe.
2
Wind the teflon tape on the adaptor and fit it to
the pipe.
To Next Page
Loading...
Need help?
General
