7
7
HOW TO USE
Turn the Hot/Warm water temperature control dial to the hot water position, press the
safety button and then push the cup-touch lever.
Press the hot water mode selection button and check if the hot water mode indicator is turned
on. Pressing the safety button just once is enough.
To Drink Hot Water
Turn the Cold/Room water changeover dial to the right and push the cup-touch lever and
you may drink room water of your desire.
Turn the Hot/Warm water temperature control dial to the warm water position, press the
safety button and then push the cup-touch lever.
Press the hot water mode selection button and check if the hot water mode indicator is turned
on.
To Drink Room Water
To Drink Warm Water
Turn the Cold/Room water changeover dial counter clockwise and push the cup-touch
lever.
Press the cold water mode selection button and check if the cold water mode indicator is
turned on.
To Drink Cold Water
- When the cold water does not extract from the filtration system, please check if
the cold water mode indicator is on.
- When the hot water does not extract from the filtration system, please check if
the hot water mode indicator is on.
- When using hot water, take care not to burn yourself.
- Warm water mode mixes hot and cold water. The temperature of the warm water
of this product is determined assuming that the hot and cold water of this product
are at their standard temperatures. Therefore, if both the hot and the cold water
temperature levels are not at their maximum, the warm water may be hotter or
colder than the usual warm water temperature. In addition, when the low water
level indicator is turned on, the warm water may be hotter than usual.
- Since warm water may be hot, take care not to burn yourself.
Tips
Tips
Tips
To Next Page
Loading...
Need help?
General
