Coway P-07IU User Manual

HOW TO USE / INSTALLATION
Maintenance
10
9
Hot
Water
INSTALLATION
Waterltrationdeviceinstallationplace1
Please install the water ltration system not at a rough place, a damp
place, a place where the unit is exposed to the direct sunlight, a
place where dust is present, or a place that the water drops.
Waterltrationdeviceinstallationplace2
Please install at the place where it is 10 cm or more o from the wall
and the bottom is at and rm.
Afterinstallingthewaterltrationsystem
Get rid of the ltered water above the fulled water 2 times or more
necessarily after installing.
 Cold water plumbing
Please connect to the cold water pipe necessarily. (If you connect to
the warm water pipe, the lter can be damaged.)
Be cautious!
To maintain optimal product performance, consult a Coway engineer for the
detailed installation methods.
There may be some water remaining inside of the lter which was used to test
the product during inspection process at the factory.
Please feel at easy and use as it isn’t the used product.
Don’t reuse the main water supply valve and hose that was previously
used when you install the product.
Tips

Coway P-07IU Specifications

General

Brand	Coway
Model	P-07IU
Category	Water Dispenser
Language	English