Reference information
Coway co., Ltd
9-7
Explanation Reference picture
3. After separating the fitting connected to the filter to
replace, please replace the filter. (Separate the fitting
using the proper tool.)
By changing the filter and connecting the fitting and the
hose precisely, check that there is no leakage and drain
the first filtered water necessarily.
4. Please fit the groove of the front cover.
Fasten the 4 fixing screws firmly with a Philips
screwdriver.
Please be sure to use the new filter after cleansing.
- Neo-sense filter
:
Please mount it after cleaning with the main water
for about 1 minutes.
- Inno-sense filter
:
Please mount it after cleaning with the main water
for about 3 minutes.
- RO Membrane filter
:
Please install the non-potable water valve and wash
the filter with water for about 5 minutes.
To Next Page
Loading...
Need help?
General
