Coway co., Ltd
1-5
Precaution
After the service
1. After the service, check the overall assembly status and terminal connection of parts.
- If the wiring is under pressure or the connection of parts is defective, reassemble the unit.
2. Make sure that internal electrical wiring is not touching sharp parts of moving parts or electrical
equipment.
-
Otherwise, product malfunction, short circuit, or fire may occur as a result.
3. Connect the electricity and check that the unit operates properly before let the consumer use the
product.
-
Make sure to inform the consumer of the malfunction and repair details.
To Next Page
Loading...
Need help?
General
