Use the following settings for the ‘folder’ location:
For USB drives: \\192.168.1.1\VanConnect\sda1
For SD cards: \\192.168.1.1\VanConnect\mmcblk0p1
Click Finish and your network drive has been created.
You can now access your network drive from your PC as long as it is
connected to the VanConnect WiFi. You will be able to view your les, add
new les, delete les and play your media les like photos, music and videos
over the network.
You do not have to map a network drive again when you change from one
USB device to another. Simply remove the USB device from the router when
the device is not in use. Insert the new USB device and the VanConnect will
automatically mount your drive and have it ready for you to access over the
network share.
Page 20
To Next Page
Loading...