INSTALLATION
There are two installation methods available:
1. No external antenna.
2. With the external antenna tted to the outside of the caravan or
motorhome. We recommend having this installed by your caravan
manufacturer or a registered caravan repair centre.
This section will guide you through the router installation process. Ensure
that your VanConnect 4G LTE Router is disconnected and powered off before
performing the steps below.
Install the router on a wall or on a shelf near a 12V power point. Placement
of the router is very important. Ensure that the internal antennas can be
positioned in a vertical position (pointing up or down). Use the included
mounting brackets to secure the router to the wall or shelf.
Page 6
To Next Page
Loading...
Need help?
General