HOW TO USE AND CONNECT TO VANCONNECT MEDIA STORAGE
This section is set out to assist you on how to view your stored les, images,
music and movies from your USB drive, portable hard drive or SD card on the
VanConnect and share them amongst your devices on the network.
To start, ensure that you have a storage device such as a USB drive, portable
hard drive or SD card connected to the VanConnect.
The storage device is to be formatted as FAT32, NTFS, ext2, ext3 or ext4 for
the system to read the device. Most USB drives and SD cards will come pre-
formatted as FAT32. If your drive is not in one of the above formats, ensure
you do a full format on the USB drive, not a quick format.
Page 17
To Next Page
Loading...
Need help?
General