6.1 How to control OSD menu
It is very easy to control OSD menu using jog switch on the rear of the camera
Press jog switch for about 1 second and OSD menu is display in the monitor, as follows.
① Move to the menu using Left/Right/Up/Down function of jog switch.
Menu selected shall be highlighted.
② If jog switch is pressed, values or status user can select shall be displayed.
③ To end control of menu, press jog switch once and then OSD menu disappeared.
6.2 DISPLAY Tab
Set display information, ICON display, temperature unit, camera ready for use and others.
To Next Page
Loading...