CPR Call Blocker - Block Last Calling Number (UK); Turning Call Blocker On and Off; Blocking Withheld;Private Callers

6
PROGRAMMING
CODES
Blocking all “International / Out of Area” callers
(Use the second code if the conventional code doesn’t work)
1. To Turn On: Get a dial tone and input * * 7 # * # or * * 7 # 00 #
2. To Turn Off : Get a dial tone and input * * 6 # * # or * * 6 # 00 #
You will hear a ‘beep’ after each # to conrm success.
Blocking all “VOIP / Unavailable” callers
1. To Turn On: Get a dial tone and input
* * 7 # 6 * #
2. To Turn Off : Get a dial tone and input * * 6 # 6 * #
You will hear a ‘beep’ after each # to conrm success.
Blocking all “0” type calls (Single digit spoof callers)
1. To Turn On: Get a dial tone and input
* * 7 # 0 #
2. To Turn Off : Get a dial tone and input * * 6 # 0 #
You will hear a ‘beep’ after each # to conrm success.
Resetting the Call Blocker back to factory settings
1. Get a dial tone and input
* * 1 # * 1 #
You will hear a ‘beep’ after each # to conrm success.
Note: Three
“Beeps” indicates that an error has occurred - Either a number has
already been entered or the specied blocking function is already turned ON.
Blocking all “International / Out of Area” callers
(Use the second code if the conventional code doesn’t work)
1. To Turn On: Get a dial tone and input * * 7 # * # or * * 7 # 00 #
2. To Turn Off : Get a dial tone and input * * 6 # * # or * * 6 # 00 #
You will hear a ‘beep’ after each # to conrm success.
Blocking all “VOIP / Unavailable” callers
1. To Turn On: Get a dial tone and input
* * 7 # 6 * #
2. To Turn Off : Get a dial tone and input * * 6 # 6 * #
You will hear a ‘beep’ after each # to conrm success.
Blocking all “0” type calls (Single digit spoof callers)
1. To Turn On: Get a dial tone and input
* * 7 # 0 #
2. To Turn Off : Get a dial tone and input * * 6 # 0 #
You will hear a ‘beep’ after each # to conrm success.
Resetting the Call Blocker back to factory settings
1. Get a dial tone and input
* * 1 # * 1 #
You will hear a ‘beep’ after each # to conrm success.
Note: Three
“Beeps” indicates that an error has occurred - Either a number has
already been entered or the specied blocking function is already turned ON.
Block Last Calling Number (This function only works within the UK)
1. To block last number: Get a dial tone and input * * 2 # * 2 #
You will hear a ‘beep’ after each # to conrm success.
Turning the Call Blocker On and Off
(Please note that the call blocker is turned ON by default)
1. To Turn On: Get a dial tone and input * * 4 # * 4 #
2. To Turn Off : Get a dial tone and input * * 3 # * 3 #
You will hear a ‘beep’ after each # to conrm success.
Blocking all “Withheld / Private” callers
1. To Turn On: Get a dial tone and input
* * 7 # 7 * #
2. To Turn Off : Get a dial tone and input * * 6 # 7 * #
You will hear a ‘beep’ after each # to conrm success.
Alternative “Withheld / Private” blocking function
(Use this if the conventional code doesn’t work)
1. To Turn On: Get a dial tone and input * * 7 # #
2. To Turn Off : Get a dial tone and input * * 6 # #
You will hear a ‘beep’ after each # to conrm success.
Block a number using an additional DECT telephone handset
1. Enter in # 2 into the handset when on an active nuisance call to block the number.