Transporting the Machine
Place the handle in the upright position.
Lock the handle pin.
Tip the machine back and transport on the
wheels.
Storage
Store inside in dry conditions to prevent
damage to your G-290.
TRANSPORTING & STORAGE
Concrete Polishing Solutions- G-290 Operator’s Manual
24/7 Technical Support- Toll Free 1-877-472-8200
19
*
CAUTION! Always place hands
in center of handlebars (see
picture) when lowering and
raising machine! This method
increases stability and reduces
the risk of machine tilting as its
re-positioned.
To Next Page
Loading...