Cradlepoint AER1600 - Page 5

cradlepoint.com
5
SIGNAL STRENGTH Blue LED bars indicate the active modem’s signal strength.
• 4 Solid Bars = Strongest signal.
• 1 Blinking Bar = Weakest signal. (A blinking bar indicates half of a bar.)
REMOVABLE MC400 MODEM Indicates the status of removable MC400 modem.
EXTERNAL USB MODEM Indicates the status of external USB modem.
All modems have the following LED indicators:
• Green = Modem has established an active connection.
• Blinking Green = Modem is connecting.
• Amber = Modem is not active.
• Blinking Amber = Data connection error. No modem connection possible.
• Blinking Red = Modem is in the process of resetting.
EC
LEDS
ADDITIONAL LED INDICATIONS
EMBEDDED MODEM Indicates the status of embedded modem (only on AER1600LPE/
AER1650LPE).
• Several dierent LEDs ash when the factory reset button is detected.
• Two of the modem LEDs blink red in unison for 10 seconds when there is an
error during rmware upgrade.
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299