Craftex CT023N User Manual

4
SPECIFIC SAFETY INSTRUCTIONS
 Always make certain that you clamp down any object that you are drilling
into.
 When drilling, make sure that you are using the correct speed for the
material being drilled.
 Clear the drill press table of all objects before turning the tool on.
 Keep hands and fingers safely away from the spinning drill bits.
 NEVER start the drill press with the drill bit in contact with the work-piece.
 Make certain that the drill bit is securely tightened into the drill chuck.
 NEVER wear gloves while operating a drill press.
 Make certain that the table lock is securely tightened before using the drill
press.
 Never attempt to drill any material that is not flat without using a secure jig
for that specific work-piece.
 Always remove the drill bit before leaving the machine.

Craftex CT023N Specifications

General

Brand	Craftex
Model	CT023N
Category	Power Tool
Language	English