Craftex CX104 - Features

5
MODEL CX104 14” 1-HP BAND SAW
As part of the growing line of Craftex CX-Series machineries, we are proud to offer the CX104 a 14”
Wood Band Saw. The Craftex name guarantees Craft Excellence. By following the instructions and
procedures laid out in this user manual, you will receive years of excellent service and satisfaction. The
CX104 is a professional tool and like all power tools, proper care and safety procedures should be
adhered to.
Motor....................................................1-HP, 110-V, Single Phase
Switch ..................................................ON/OFF Switch
2 Speeds..............................................2300 / 3200 FPM
Cast Iron Table Size ............................14” x 18” ( Including Extension Table)
Table Tilt ..............................................-5° to 45°
Wheel Construction..............................Precision Balanced Cast Iron
Max Blade Width..................................3/4"
Min Blade Width...................................1/8”
Maximum Cutting Height......................7”
Floor to Table Height ...........................44”
Cutting Capacity/Throat .......................13-5/8”
Dust Collection Port .............................4”
Blade Length .......................................101”
Bearings...............................................Sealed and Permanently Lubricated
Computer Balanced Cast Iron Wheels........Yes
Co-Planer Adjustment..........................Yes
Powder Coated Paint ...........................Yes
Quick Release Tension Adjustment.....Yes
Overall size ..........................................20” x 33” x 74”
Approximate Weight.............................78 Kg
Warranty ..............................................3 Years
CX104 WOOD BAND SAW
FEATURES