Craftex CX212 User Manual

5
MODEL CX212 – 10” CABINET TABLE SAW WITH 30" FENCE
As part of the growing line of Craftex woodworking equipment, we are proud to offer CX212 a
10” Cabinet Table Saw. By following the instructions and procedures laid out in this owner’s
manual, you will receive years of excellent service and satisfaction. The CX212 is a
professional tool and like all power tools, proper care and safety procedures should be
adhered to.
Motor ..............................................2HP, 120V, Single Phase
Blade Guard ...................................Riving Knife, CSA Approved & UL897 Compliant
Drive System ..................................“V” Belt Drive
Rip Fence .......................................“T” Type Heavy Duty Rip Fence With Aluminum Face
Fence Size......................................L 35-3/4" x W 3-1/8" x H 2-7/16"
Table Size.......................................40-1/2” x 27” (with Extension Wings)
Floor to Table Height......................35-3/8"
Arbor Tilt.........................................Left Tilting
Arbor Diameter ...............................5/8"
Arbor Speed ...................................3450 RPM
Blade Size ......................................10”
Maximum Depth of Cut at 90°.........3-1/4"
Maximum Depth of Cut @ 45°........2-1/4”
Dust Collection Port........................One 4” Port
Approximate Weight .......................130 Kgs
CX212 - 10” CABINET TABLE SAW
FEATURES

Craftex CX212 Specifications

General

Brand	Craftex
Model	CX212
Category	Saw
Language	English