Craftex CX212 User Manual

7
SETUP
Before setting up your machine you should
read and understand the instructions given
in this manual.
The unpainted surfaces of this table saw
are coated with rust prevention waxy oil and
you will want to remove this before you
begin assembly. Use a solvent cleaner that
will not damage painted surfaces.
UNPACKING
The machine is properly packaged and
shipped completely in a crate for safe
transportation. When unpacking, carefully
inspect the crate and ensure that nothing
has been damaged during transit. Open the
crate and check that the machine is in a
good condition.
LIST OF CONTENTS
A. Table Saw........................................ 1
B. Table Extension Wings .................... 2
C. Cabinet Door.................................... 1
D. Blade Guard Assembly .................... 1
E. Table Insert...................................... 1
F. Dado Insert ...................................... 1
G. Saw Blade 10" x 40T ....................... 1
H. Spreader.......................................... 1
I. Push Stick........................................ 1
J. Miter Gauge..................................... 1
K. Miter Gauge Handle......................... 1
L. Hand Wheels ................................... 2
M. Hand Wheel Knobs.......................... 2
N. Fence............................................... 1
O. Fence Handle .................................. 1
P. Front & Rear Fence Rails ................ 2
Q. Fence Rail End Caps....................... 4
R. Dust Port 4"...................................... 1
S. Hardware Bags................................ 2
WARNING!
CX212 is a very heavy machine, do not
over-exert yourself. For safe moving
method use fork truck or get the help of
an assistant or friend.

Craftex CX212 Specifications

General

Brand	Craftex
Model	CX212
Category	Saw
Language	English