To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 124.34985 and is the answer not in the manual?
General| Model Number | 124.34985 |
|---|---|
| Motor | 15 amp |
| No Load Speed | 5000 rpm |
| Number of Speeds | 1 |
| Cord Length | 6 ft. |
| Bevel Capacity | 45 degrees |
Provides general safety advice and precautions to follow before operating the drill press.
Details on power supply, motor specifications, and grounding for safe operation.
Recommendations for selecting and using extension cords safely to prevent hazards.
Lists the main parts included in the drill press packaging.
Identifies individual loose parts that should be checked upon unpacking.
Details the accessories provided in a separate box, including tools and parts.
Instructions and illustration for attaching the table fence for workpiece alignment.
Instructions for securing the drill press column to its base.
Steps for assembling and attaching the drill press table to the column.
Procedure for mounting the head assembly onto the drill press column.
Guidance on attaching the feed handles to the drill press head.
Steps for cleaning and securely installing the drill chuck onto the spindle.
Instructions for attaching the knob to the head assembly lid.
Procedure for installing the flexible work lamp onto the drill head.
Covers tilting, height, and swing adjustments for the drill press table.
How to set the depth gauge and stop nuts for precise drilling depth.
Instructions for changing spindle speeds by adjusting the belt and pulleys.
Procedure for adjusting the spindle return spring tension for proper movement.
Steps to check for and eliminate play in the spindle assembly.
Guide for aligning the laser pointer beam with the drill bit's target spot.
Detailed steps for correctly installing a drill bit into the chuck.
Safety guidelines for positioning the workpiece against the column.
Instructions for using a drill press vise for securing small workpieces.
Basic procedure for drilling holes, including feed rate and lubrication.
Table of recommended drilling speeds for various drill bit types and materials.
General care, cleaning, and lubrication advice for the drill press.
