To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 137.212150 and is the answer not in the manual?
General| Model Number | 137.212150 |
|---|---|
| Type | Circular Saw |
| Arbor Size | 5/8 inch |
| Max RPM | 5000 RPM |
| Power Source | Corded Electric |
| Voltage | 120V |
| Amps | 13 Amps |
| Weight | 10.5 lbs |
| Bevel Capacity | 45 degrees |
| Depth of Cut at 45 degrees | 1-3/4 inch |
| Blade Diameter | 7-1/4 inch |
Essential safety guidelines before operating the saw.
Specific safety precautions for using the miter saw.
Crucial electrical safety and specifications for the saw.
Details on protecting the motor and its components.
Guidelines on using appropriate accessories safely.
Essential safety steps before and during saw operation.
Personal protective equipment and attire recommendations.
Precautions related to the laser guide system.
Details on motor power, blade size, and cutting capacities.
Steps for safely unpacking the miter saw from its carton.
Step-by-step guide for assembling the saw and attachments.
Procedures for safely installing, removing, and adjusting the saw blade.
How to adjust fence squareness and miter/bevel settings.
Procedures for aligning the laser guide and replacing batteries.
Crucial pre-operation checks and inspections.
Guidance on planning cuts and handling workpieces safely.
Procedures for starting the saw and proper body/hand positioning.
Instructions for performing bevel, miter, and compound cuts.
Guidance on cutting bowed material and using auxiliary fences.
Specific techniques for cutting base and crown molding.
Care for the lower blade guard, sawdust removal, and lubrication.
Solutions for common motor and saw operation problems.
Detailed list of parts with identification numbers for Schematic A.
Detailed list of parts with identification numbers for Schematic B.
Detailed list of parts specific to the motor assembly.
