To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 137.212540 and is the answer not in the manual?
Covers general safety practices for operating any power tool, emphasizing awareness and proper procedures.
Details necessary electrical connections, circuit protection, and safety precautions for the miter saw.
Instructions for protecting the saw's motor from damage due to sawdust accumulation or improper use.
Specifies the correct type, gauge, and condition of extension cords for safe and efficient power tool operation.
Lists all items included in the saw's packaging for user verification during unpacking.
Defines specific terminology related to the features and components of the Craftsman compound miter saw.
Explains common woodworking vocabulary relevant to operating the miter saw and performing cuts.
Step-by-step guide for assembling the miter saw stand, including attaching supports and legs.
Instructions for securely mounting the miter saw unit onto the assembled stand.
Details on how to attach the miter handle to the miter table for adjusting cutting angles.
Explains the location and purpose of the blade wrench for storage and use.
Instructions on how to raise and lower the cutting head assembly for operation and transport.
Guides on installing the dust collection elbow and dust bag for managing sawdust.
Steps for attaching table extensions to increase work support surface area.
Procedures for safely removing and installing the saw blade, including necessary precautions.
Detailed steps for correctly installing a new saw blade, including alignment and tightening.
Instructions for attaching the hold-down clamp to secure workpieces during cutting.
Steps to ensure the saw fence is perfectly perpendicular to the blade for accurate cuts.
Explains how to adjust the miter scale indicator for precise miter angle settings.
Guides on aligning auxiliary fences to the blade for increased cutting precision.
Instructions for leveling the extension tables to match the main miter table surface.
How to adjust the maximum cutting depth of the saw head to prevent contact with the table.
Procedures for setting and adjusting the bevel stops for accurate angle cuts.
Steps to check and adjust the laser guide for accurate alignment with the saw blade.
Essential safety rules and procedures to follow before and during basic saw operation.
Pre-operation checks and steps to ensure the saw is properly assembled and safe to use.
Daily or pre-operation inspection steps to ensure the saw is in safe working condition.
Emphasizes the importance of a clean workspace to prevent accidents and ensure safety.
General advice on planning work, protecting oneself, and understanding the tool's capabilities.
Guidance on selecting the right tool, preparing workpieces, and planning cutting operations.
Recommendations on appropriate clothing and personal protective equipment for saw operation.
Checks to perform on workpieces, like removing nails, to prevent hazards during cutting.
Advice on maintaining balance and proper body positioning to avoid accidents.
Specific safety measures for handling and cutting irregularly sized or shaped materials.
Precautions and actions to take while the saw is in operation or if unusual noises occur.
Correct techniques for positioning the body and hands for safe and effective saw operation.
Instructions on operating the laser guide system and its safety warnings.
Steps for safely starting the miter saw, including the use of the safety lock-off switch.
Proper adjustment and use of the sliding fence for various cutting operations.
Instructions for performing bevel cuts, including fence and angle adjustments.
Guidance on setting up and performing miter cuts using the saw's locking mechanisms.
Steps for executing compound cuts, combining miter and bevel angles.
Techniques for safely cutting warped or bowed workpieces using the fence.
Recommendations for supporting long or heavy workpieces to ensure stability and safety.
Information on attaching and using an auxiliary fence for increased cutting depth.
Specific technique for cutting large lumber like a 4x4 in a single pass.
How to perform miter cuts on workpieces positioned vertically on edge.
Guidance on cutting base molding profiles, including setup and practice tips.
Techniques for accurately cutting crown molding, requiring precise angle settings.
Step-by-step instructions for replacing the batteries in the laser guide system.
Procedure for inspecting and replacing worn carbon brushes in the motor.
Importance of the lower blade guard and its proper maintenance and inspection.
How to manage sawdust accumulation to ensure smooth operation and prevent issues.
Guidance on lubricating specific pivot points and moving parts as needed for smooth operation.
Common motor-related problems and their suggested solutions for the miter saw.
Solutions for common issues encountered during saw operation, such as blade alignment or jamming.
Lists all parts for Schematic A, including I.D. numbers, descriptions, sizes, and quantities.
Lists all parts for Schematic B, including I.D. numbers, descriptions, sizes, and quantities.
Lists all parts for Schematic C (Motor), including I.D. numbers, descriptions, sizes, and quantities.
Lists all parts for Schematic D (Stand), including I.D. numbers, descriptions, sizes, and quantities.
General