To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 137.21229 and is the answer not in the manual?
Details about the power source, arbor shaft size, speed, brake, and insulation.
Specifications for the miter saw, including cutting capacity and table features.
Essential safety guidelines to follow before operating the power tool for the first time.
Crucial safety rules specific to the compound miter saw's operation and use.
Details the saw's electrical needs, including voltage, amperage, and fuse/breaker requirements.
Explanation of the saw's double insulation feature for enhanced electrical safety.
Measures to protect the motor from damage, including ventilation and proper usage.
Recommendations for selecting and using appropriate extension cords for the saw.
List of approved accessories and warnings against using unapproved ones for safety.
Steps and precautions for safely unpacking the miter saw and its components.
Definitions of terms specific to the operation and parts of a compound miter saw.
Definitions of general woodworking terms relevant to using the miter saw.
Instructions for attaching the miter handle to the saw's table.
Guidance on storing the saw blade wrench for convenience and to prevent loss.
Procedure for raising and lowering the cutting head, including safety warnings.
Steps for attaching the dust bag to the saw's exhaust port.
Detailed steps for safely removing the saw blade from the miter saw.
Instructions for correctly installing a new saw blade, ensuring proper alignment and security.
Procedure to ensure the fence is square to the blade for accurate cuts.
How to adjust the miter scale indicator for accurate angle settings.
Steps to set the blade at a 90-degree angle relative to the miter table.
Instructions to set the blade at a 45-degree bevel angle relative to the miter table.
Procedure to verify if the laser beam is correctly aligned with the saw blade.
How to adjust the laser element's angle for precise beam alignment.
Detailed steps for fine-tuning the laser beam alignment using set screws.
Key safety precautions to ensure safe operation of the miter saw.
Pre-operation checks to verify the saw's condition and safety features.
Guidance on using only approved accessories to prevent hazards.
Recommendations for appropriate attire and personal protective equipment when operating the saw.
Checks to perform on the workpiece before cutting to ensure safety and prevent issues.
Safety precautions to take while the saw is in operation.
Specific bevel and miter settings for cutting crown molding accurately for 90° corners.
Instructions for replacing worn carbon brushes to maintain motor performance.
Guidance on lubricating specific pivot points for smooth operation.
Common motor problems and their suggested corrective actions.
Common operational issues with the saw and their recommended solutions.
A detailed list of all parts for the miter saw, referenced by schematic numbers.
General