To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 139.18452D and is the answer not in the manual?
General| Type | Chain Drive |
|---|---|
| Horsepower | 1/2 HP |
| Safety Sensors | Yes |
| Voltage | 120V |
| Belt Type | Chain |
| Remote Control | Yes |
Explains safety symbols and signal words used in the manual.
Critical warnings for preparing the garage door.
Lists the necessary tools for installation.
Guidelines for installing on sectional garage doors.
Guidelines for installing on one-piece garage doors.
Guides on assembling the rail and installing the trolley.
How to attach the rail to the motor unit.
Steps to install the idler pulley into the rail.
Instructions for installing the chain and cable.
Details on adjusting the chain tension for proper operation.
Crucial safety guidelines before starting installation.
How to find and mark the header bracket position.
Step-by-step guide for mounting the header bracket.
Connects the rail assembly to the header bracket.
Guidance on placing the opener unit correctly.
Instructions for securely mounting the opener unit.
Steps for wiring and mounting the wall-mounted door control.
How to install the opener's light bulb and lens.
How to attach the manual release rope and handle.
Information on power connection and wiring.
Steps to install the safety reversing sensors.
How to mount the safety sensor brackets.
Guides on connecting and wiring the safety sensors.
How to attach the door bracket to the garage door.
Specifics for fastening the door bracket on one-piece doors.
Links the door arm to the opener's trolley.
How to assemble and adjust the door arm for one-piece doors.
How to set the opener's open and close limits.
How to set the opener's force for opening and closing.
How to verify the safety reversal mechanism works.
How to test the safety reversing sensors.
Critical safety rules for operating the opener.
How to operate the opener with remotes and controls.
How to use the wired door control button.
How to operate the door without power using the release handle.
Recommended maintenance tasks and frequency.
How to replace the battery in the remote control.
Troubleshoot sensor alignment, remote activation, and related issues.
Troubleshooting for unexpected door reversals.
Troubleshooting motor humming and trolley issues.
Explains error codes indicated by LED flashes.
Steps to program remote controls to the opener.
How to clear all programmed codes from the opener.
Steps for programming the keyless entry system.
Lists and identifies parts for the rail assembly.
Lists and identifies parts used during installation.
Lists and identifies parts for the motor unit.
Programmable remotes and password entry systems.
Accessories for door height and sensor mounting.
Information for ordering parts and manuals.
