EasyManua.ls Logo

Craftsman 139.18452DM User Manual

Craftsman 139.18452DM
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1/2 HP
GARAGE DOOR OPENER
For Residential Use Only
Models • 139.18451DM • 139.18452DM • 139.18453DM • 139.18473DM • 139.18490DM
Read and follow all safety rules and
operating instructions before first use
of this product.
Fasten the manual near the garage
door after installation.
Periodic checks of the opener are
required to ensure safe operation.
Owner’s Manual
ENGLISH
Sears Canada, Inc., Toronto, Ontario M5B 2B8
Safety Precautions
Assembly
Installation
Adjustment
Maintenance
Operation
Troubleshooting
Parts List
®

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Craftsman 139.18452DM and is the answer not in the manual?

Craftsman 139.18452DM Specifications

General IconGeneral
Model Number139.18452DM
BrandCraftsman
CategoryGarage Door Opener
Horsepower1/2 HP
Voltage120V
Frequency60 Hz
Remote Controls Included2
Keyless EntryYes
Battery BackupNo
Max Door Height7 ft
Safety FeaturesSafety Sensors

Summary

Preparing your garage door

Planning

Assembly Step 1

Assemble the Rail & Install the Trolley

Guides on assembling the opener rail and installing the trolley.

Assembly Step 2

Fasten the Rail to the Motor Unit

Instructions for securely attaching the rail to the motor unit.

Assembly Step 3

Install the Idler Pulley

Steps for installing the idler pulley into the rail assembly.

Assembly Step 4

Install the Chain/Cable

Details on how to install the drive chain and cable onto the opener.

Assembly Step 5

Tighten the Chain

Instructions for adjusting and tightening the drive chain tension.

Installation

Installation Step 1: Determine the Header Bracket Location

Guidance on selecting the correct position for the header bracket.

Installation Step 2: Install the Header Bracket

Instructions for mounting the header bracket to the wall or ceiling.

Installation Step 3: Attach the Rail to the Header Bracket

Steps for connecting the opener rail to the installed header bracket.

Adjustment Step 1

Adjust the UP and DOWN Travel Limits

How to set the points where the garage door stops when opening or closing.

Adjustment Step 2

Adjust the Force

How to adjust the force settings for smooth and safe door operation.

Adjustment Step 3

Test the Safety Reversal System

Procedures to verify the safety reversal system functions correctly.

Adjustment Step 4

Test The Protector System®

Tests to confirm the safety reversing sensors are working properly.

Operation

PROGRAMMING

Related product manuals