To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 141.142580 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Model Number | 141.142580 |
| Power Source | Corded Electric |
| Blade Diameter | 7-1/4 inches |
| Arbor Size | 5/8 inches |
| Depth of Cut at 45 degrees | 1-3/4 inch |
Provides essential safety precautions for operating power tools, including personal protection and work area safety.
Emphasizes the importance of operator common sense and alertness for safe operation.
Provides step-by-step instructions for assembling the foldable leg stand for the table saw.
Step-by-step guide for attaching the anti-kickback pawls and blade guard for safe operation.
Procedures to check and ensure correct alignment between the riving knife and the saw blade.
Explains how to properly secure and level the table saw on its stand for stable operation.
Details how to adjust the riving knife for different cutting operations and alignment with the blade.
Essential information on proper grounding to prevent electrical hazards.
Detailed instructions for making lengthwise rip cuts with the table saw.
How to perform lengthwise rip cuts with the blade tilted at an angle.
Explains the common causes of kickback and the potential dangers involved.
How to perform angled miter cuts using the miter gauge.
Instructions for performing cuts that combine bevel and miter angles.
Safety practices and techniques to prevent kickback during saw operation.
Instructions for making cross cuts with the blade tilted at an angle.
Step-by-step instructions for performing a standard cross cut on the table saw.
Routine cleaning and care procedures to keep the saw in good working condition.
Step-by-step instructions for safely removing and installing a new saw blade.
