Craftsman 113.23611 User Manual

Save This:Manual
For Future Reference
MODEL NO.
113.236!10
SCROLL SAW
! Serial
Number
Model and serial number
may be found attached to
the underside of the
worktable.
You should record both
model and serial number
in a safe place for future
use.
CAUTION:
Read GENERAL
and ADDITIONAL
SAFETY
INSTRUCTIONS
carefully
16 INCH
SCROLL
o assembly
o operating
® repair parts
Sold by SEARS, ROEBUCK AND CO., Chicago, IL 60684 U.S.A.
Part No, 66048 Printed in T_{war_

Craftsman 113.23611 Specifications

General

Model Number	113.23611
Category	Table Saw
Arbor Size	5/8 inch
Motor Type	Induction
Blade Diameter	10 inches
Rip Capacity (Left)	12 inches
Table Size	20 x 27 inches

Summary

General Safety Instructions for Power Tools

Know Your Power Tool

Use Safety Goggles

Always wear safety goggles complying with ANSI Z87.1 during operation.

Avoid Accidental Starting

Ensure the switch is "OFF" before plugging in the power cord to prevent unintended startup.

Additional Safety Instructions for Scroll Saw

Blade Safety and Protection

Wear Safety Goggles

Protect your eyes from thrown objects by wearing safety goggles.

Unpacking and Checking Contents

Warning: Never Connect Plug

Do not connect power until assembly is complete and instructions are read.

Caution: Never Lift Saw by Arm

Assembly

Removing and Installing Blades

Blade Safety Precautions

Warnings about turning off the saw and removing the key before blade work.

Mounting the Scroll Saw to a Bench

Getting to Know Your Scroll Saw

ON-OFF Switch and Key Operation

Explains the locking feature of the switch and the use of the safety key.

Operation of Your Scroll Saw

Making Interior Scroll Cuts

Maintenance

Trouble Shooting Guide

Breaking Blades

Motor Not Running