To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.234880 and is the answer not in the manual?
Explains DANGER, WARNING, CAUTION meanings.
Lists assembly, function learning, and manual review.
Covers environment, placement, and electrical safety.
Details checks, maintenance, operational hazards, and material limits.
Emphasizes safety gear, freehand cutting, workpiece support, and blade precautions.
Details motor specs, voltage, amperage, and RPM.
Explains double insulation and plug polarization.
Covers motor protection, overload, and voltage issues.
Guidelines for extension cord wire sizes.
Warnings about electrical shock, lifting, and damaged parts.
Steps for securing and lifting the saw from its packaging.
Identifies warning labels and handle/carriage locks.
Describes depth, miter, bevel locks, and stops.
Covers lower blade guard and saw handle features.
Details cover plate screw and index points.
Steps to attach and check the lower blade guard link.
Detailed steps to align the blade to a 90° angle with the table.
Procedures for setting the blade to a 45° angle to the table.
Steps to ensure the fence is at a 90° angle to the blade.
How to adjust the miter scale indicator to the 0° position.
Adjusting the bevel lock handle and pivot for smooth movement.
Ensuring the cutting head rises smoothly and checking pivot play.
Setting the depth stop for maximum cutting capacity.
Precautions regarding blade size and unexpected starting.
Step-by-step guide for unplugging and removing the blade.
Instructions for installing a new blade, collar, washer, and screw.
Warnings about injury, locking, unplugging, and lifting.
Advice on safe environment and positioning the saw.
Steps for bolting, clamping, or mounting to plywood.
Lists steps before using, including assembly, checks, and maintenance.
Covers avoiding jams, using correct accessories, and general safety awareness.
Guidance on planning cuts, supporting workpieces, and avoiding hazards.
Details on freehand cutting, workpiece handling, and avoiding dangerous movements.
Warnings and procedures when the saw blade is spinning.
Guidelines for safe and effective hand and body placement during operation.
Steps for performing chop and miter cuts.
Instructions for making bevel and compound cuts.
Detailed steps for cutting wider workpieces using the slide function.
Instructions and warnings for using the hold down vise.
How to properly cut workpieces with a bow.
Guidance on using supports for long workpieces.
Steps to create dados using the depth adjustment and chisel.
Tips for compound miter and crown molding cuts, including settings.
Warnings and basic advice for saw maintenance and lubrication.
Detailed instructions for replacing brushes, guards, and lubricating pivots.
Lists compatible accessories and essential blade requirements.
Common electrical issues and their solutions.
Solutions for common mechanical and operational problems.
Visual representation of the saw's electrical connections.
Procedures for diagnosing and fixing brake issues.
Critical safety warnings for inspecting and using carbide blades.
Guidelines for mounting, inspecting, and handling carbide blades.
Illustrated breakdown and list of major saw parts for Figure 1.
Illustrated breakdown and list of specific saw components for Figure 2.
Illustrated breakdown and list of specific saw parts for Figure 3.
Toll-free numbers for repair service.
Toll-free numbers and information required for ordering parts.
General