To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.234680 and is the answer not in the manual?
Steps and checks before operating the miter saw.
Guidelines for safely moving and positioning the miter saw.
Precautions to prevent accidental movement and injury.
Crucial safety warnings related to electrical hazards.
Specifications for the saw's power requirements.
Warnings about proper circuit protection and wiring.
Safety warning regarding unplugging the cord during assembly.
List of tools necessary for assembly and alignment procedures.
Identification of major functional parts of the miter saw.
Instructions for attaching the lower blade guard assembly.
Procedure to check and align the blade squareness to the table.
Adjusting the depth stop for maximum cutting capacity.
Verifying and adjusting the cutting head position.
Adjusting pivot joints for proper saw movement.
Step-by-step guide for blade removal and installation.
Procedures for securely mounting the miter saw.
Pre-operation checks and understanding instructions.
Daily inspection and preparation steps for the saw.
Instructions for performing a miter cut on the saw.
Instructions for performing a bevel cut on the saw.
Instructions for performing a compound cut on the saw.
Proper techniques for cutting bowed workpieces.
Specific advice for cutting crown molding.
General maintenance procedures and safety warnings.
Guide for replacing worn carbon brushes.
Importance and care of the lower blade guard.
How to manage sawdust accumulation.
List of approved accessories for the saw.
Critical specifications for saw blades.
Procedures for lubricating moving parts.
Diagnosing and fixing brake issues.
Troubleshooting steps for a non-starting motor.
Corrective actions for blade hitting the table.
Steps to fix inaccurate cut angles.
Solutions for blade binding and burning issues.
Specific brake troubleshooting for service personnel.
Detailed list of parts with part numbers for replacement.
General