Craftsman 113.234610 User Manual

_F Save This Manual
or Future Reference
owner's
manual
MODEL NO.
113.234610
10" COMPOUND
MITER SAW
Serial
Number
Model and serial numbers
may be found at the side of
the miter saw arm.
You should record both
model and serial number in
a safe place for future use.
CAUTION:
READALL
INSTRUCTIONS
CAREFULLY
CRRFTSMRN
IO-INCH COMPOUND
MITER SAW
• assembly
• operating
• repair parts
Sold by SEARS, ROEBUCK AND CO., Chicago, IL 60684 U.S.A.
Part No. SP5092
J

Craftsman 113.234610 Specifications

General

Brand	Craftsman
Model	113.234610
Category	Saw
Language	English

Summary

General Safety Instructions for Power Tools

Personal Safety and Protective Gear

Wear safety goggles, proper apparel, and footwear.

Safe Tool Operation and Maintenance

Ensure proper use, maintenance, and safety precautions.

Additional Safety Instructions for Miter Saw

Pre-Use Preparation and Checks

Assembly, learning functions, manual reading, and initial inspection.

Safe Installation and Moving Procedures

Procedures for installing, moving, and lifting the saw safely.

Detailed Pre-Use Safety Checks

Operational Safety When Saw is Running

Guidelines for blade speed, feed rate, clearing jams, and hand positioning.

Safe Cutting Practices

Guidelines for blade speed, feed rate, clearing jams, and hand positioning.

Electrical Connections and Motor Safety

Motor Specifications and Safety Protection

Details motor specs, ventilation, and circuit protection for safe operation.

Assembly and Alignment Procedures

Lower Blade Guard Assembly

Step-by-step instructions for attaching the lower blade guard.

Blade Squareness to Table Alignment

Procedure to check and align blade squareness to the table.

Blade Alignment with Turn Table Slot

Blade Squareness to Fence Alignment

Procedure to check and adjust blade squareness to the front fence.

Pivot Adjustments and Depth Stop

Bevel Pivot Adjustment

Procedure to adjust bevel pivot for smooth movement.

Maintaining Maximum Cutting Capacity

Saw Operations and Blade Management

Removing or Installing the Blade

Safety precautions and steps for blade removal and installation.

Basic Saw Operations

Pre-Operation Safety Checks

Non-Ferrous Metal Cutting Precautions

Blade Setup and Cutting Readiness

Workpiece Bracing and Cutting Safety

Operational Safety During Cutting

Safe practices during operation, including blade speed, feed rate, and jam clearance.

Body and Hand Positioning for Safety

Maintenance and Lubrication

Replacing Carbon Brushes

Troubleshooting Guide - Motor Issues

Brake Does Not Stop Blade

Motor Does Not Start

Troubleshooting Guide - General Issues

Blade Alignment and Cutting Accuracy

Miter Adjustment and Power-Head Stability

Blade Binding, Jamming, or Vibration

Addressing blade binding, jamming, or vibration.