To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.23301 and is the answer not in the manual?
General| Model Number | 113.23301 |
|---|---|
| Type | Table Saw |
| Blade Diameter | 10 inches |
| Voltage | 120V |
| Table Size | 20 x 26 inches |
| Arbor Size | 5/8 inches |
Read owner's manual for application, limitations, and potential hazards.
Ensure proper grounding using 3-conductor cord and plug for safety.
Maintain guards in working order, proper adjustment, and alignment.
Maintain a clean, uncluttered workspace to prevent accidents.
Follow steps for assembly, alignment, and familiarity with controls.
Avoid awkward positions and improper tool usage to prevent slips.
Specific precautions for ripping operations, including kickback prevention.
Guidelines for safe crosscutting operations and workpiece handling.
List of tools required for assembly and adjustments.
Steps for safely unpacking the saw and verifying all parts.
Instructions for securely mounting the radial saw base on a stable surface.
Steps to install the motor and carriage onto the radial arm.
Procedures for aligning table supports parallel to the radial arm.
How to ensure accurate square crosscut movements of the carriage.
Specifications for voltage, amperage, frequency, and motor details.
Explanation of overload protector and safe operating procedures.
Recommended wire gauge for extension cords based on length.
How to adjust the blade depth using the elevation crank.
Releasing, securing, and indexing the radial arm angle.
How to lock and unlock the carriage for stable cutting.
Adjusting the blade angle using bevel lock and latch pin.
How to perform safe crosscuts using the radial saw.
Cutting at angles using miter and bevel adjustments.
Safe techniques for ripping wood to width, including kickback prevention.
Guidelines for making dado cuts safely and efficiently.
Adjusting column tube key for rough or chattering movement.
Troubleshooting inaccurate or non-square cuts and adjustments.
Diagnosing and fixing issues with the yoke indexing mechanism.
Identifying and correcting blade 'heeling' conditions.
Identifying specific points for periodic lubrication.
Identifying components that should not be lubricated.
List of available accessories with their corresponding catalog numbers.
Detailed list of parts corresponding to Figure 1 exploded view.
Detailed list of parts corresponding to Figure 2 exploded view.
Detailed list of parts corresponding to Figure 3 exploded view.
Information on obtaining repair parts and authorized service.
Required details for ordering replacement parts from Sears.
