To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 152.221040 and is the answer not in the manual?
Identifies the Craftsman 10-inch table saw, including model number and power specifications.
Provides essential safety precautions for operating the table saw.
Instructions to follow before operating the table saw.
Covers crucial safety measures like dust control, proper clothing, and tool use.
Explains how to properly ground the table saw for electrical safety.
Details safety rules specific to operating a table saw, including eye protection.
Advises on avoiding kickback and safe operating procedures.
Step-by-step guide for assembling the cabinet legs and poly-V belt.
Instructions for attaching the table saw extension wings.
Guide for installing the handwheels for blade height and tilt.
Steps for installing the blade guard and splitter assembly.
Procedure for mounting the saw blade onto the arbor.
Instructions for assembling the rip fence components.
Details on attaching the front fence rails and alignment bars.
Steps for attaching rear rails, cursors, and fence body.
How to safely start and stop the table saw using the ON/OFF switch.
How to adjust the blade height using the handwheel.
Setting the positive stops for 90-degree and 45-degree blade bevels.
Procedure for tilting the blade for bevel cuts.
Steps to check if the blade is parallel to the miter slots.
Instructions for realigning the saw blade if necessary.
Lists potential issues like motor failure, overheating, and binding with solutions.
General