To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 152.229000 and is the answer not in the manual?
General| Model Number | 152.229000 |
|---|---|
| Type | Angle Grinder |
| Voltage | 120V |
| Power Source | Corded Electric |
| Spindle Thread | 5/8"-11 UNC |
| Wheel Diameter | 4.5" |
Details about the drill press motor, including HP, volts, phase, and RPM.
Details about the drill press itself, like belt type, speeds, chuck capacity, and dimensions.
General safety guidelines and precautions to follow when operating the drill press.
Essential pre-operation checks and safety advice for safe use.
Recommendations for selecting and using appropriate extension cords for the drill press.
Safety guidelines for operating the laser alignment system on the drill press.
Instructions for unpacking the drill press and verifying all parts are present.
Lists the tools needed for assembling the drill press.
Step-by-step guide to assembling the column, base, and table components.
Instructions for assembling the main drill press head and motor unit.
Instructions for assembling and installing the laser alignment system.
How to operate the power switch and secure the drill press.
Information on operating and maintaining the flexible work light.
Detailed instructions for adjusting table height, tilt, and rotation.
Guide on how to change drill speeds by adjusting the belt and pulleys.
How to set and use the depth stop mechanism for accurate drilling.
Instructions for adjusting the spring that returns the drill chuck.
How to lock the quill in position for specific operations.
Techniques and recommended practices for drilling wood.
Techniques and safety for drilling metal, aluminum, and brass.
General procedure for operating the drill press for drilling.
Warning about feeding too quickly and its consequences.
Instructions for replacing the battery in the laser assembly.
Guidance on lubricating the drill press for optimal performance and longevity.
Procedures for cleaning the drill press safely and effectively.
