To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 19983 - 1/2 in. Impact Wrench and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | 19983 - 1/2 in. Impact Wrench |
| Category | Impact Driver |
| Language | English |
Familiarize with all instructions and warnings before operating any pneumatic tool.
Wear impact resistant eye protection meeting ANSI Z87.1 standards.
Use hearing protection if noise level exposure equals or exceeds 85dBA.
Discontinue use if experiencing tingling, numbness, or pain in hands/arms.
Tool operates at max 90 PSI; higher pressure causes injury or tool failure.
Use only sockets designated for impact wrenches to avoid breakage.
Built-in regulator for power output, pin type clutch, ring-type socket retainer.
Details drive size, impacts, free speed, torque, weight, air consumption, and hose size.
Clear air hose, shut off air supply before changing sockets or servicing.
Operate at 90 psi; use clean, dry air. Use appropriate hose size for length.
Use in-line filter-regulator-lubricator. Check and fill with air tool oil regularly.
Check oil reservoir every 40 hours. Refill with 1 oz. SAE 30 weight oil.
