To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 875.191183 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | 875.191183 |
| Category | Impact Driver |
| Language | English |
Safety guidelines for maintaining a clean and well-lit work environment.
Precautions for operator alertness, proper attire, and safe tool handling.
Instructions for securing workpieces, proper tool usage, and maintenance.
Guidelines for professional repair and use of authorized replacement parts.
Requirements for connecting to and using compressed air sources safely.
Mandates wearing impact-resistant eye protection meeting ANSI Z87.1 standards.
Recommends hearing protection for noise levels exceeding 85dBA.
Warns against prolonged vibration exposure causing numbness or discomfort.
Specifies the tool's maximum operating pressure of 90 PSI.
Advises using only impact-rated sockets and checking them for wear.
Lists key features like built-in regulator and pin-type clutch.
Details technical specs like drive size, torque, speed, and air consumption.
Steps before connecting air, like clearing the hose and ensuring shut-off.
Guidance on proper air pressure, hose size, and filter-regulator-lubricator use.
Explains how to adjust the power regulator valve for desired output.
Recommends an in-line lubricator and details the procedure for setting it.
States the anvil housing is greased and requires no maintenance.
