To Next PageTo Next Page
Need help?Do you have a question about the Craftsman CMCF800 and is the answer not in the manual?
General| Voltage | 20V |
|---|---|
| No Load Speed | 0-2, 800 RPM |
| Chuck Size | 1/4 in |
| Chuck Type | Quick Release |
| Battery Type | Lithium-Ion |
Explains safety alert symbols like DANGER, WARNING, CAUTION, and NOTICE used in the manual.
Identifies and lists the main parts of the impact driver, such as trigger, chuck, battery, and handle.
Guidelines for maintaining a clean, well-lit work area and keeping bystanders away.
Precautions regarding power tool plugs, grounding, rain exposure, and cord usage.
Advice on staying alert, using personal protective equipment (PPE), and preventing accidental starts.
Instructions on using the correct tool, proper maintenance, and safe handling practices.
Guidelines for charging, using, and storing battery packs safely to prevent injury or fire.
Instructions for servicing the tool and battery packs, emphasizing qualified repair and identical parts.
Clarifies that impact wrenches are not torque wrenches and the need for a separate torque measurement device.
Recommendations for securing workpieces, wearing eye and hand protection, and managing tool operation.
Emphasizes wearing certified safety glasses, face masks, and hearing protection.
Warns about potential exposure to hazardous chemicals in dust and recommends protective measures.
Step-by-step guide on how to charge lithium-ion battery packs and understand charging indicators.
Tips for optimal battery life and performance, including temperature considerations and normal heat.
Instructions on how to install and remove accessories using the 1/4" hex quick release chuck.
Details on the integrated LED work light that illuminates during trigger activation.
Explains how to control tool speed and direction using the trigger and directional button.
Step-by-step instructions for correctly inserting and removing the battery pack from the tool.
Guidance on holding the tool correctly for safe operation and anticipation of sudden reactions.
Instructions for attaching the optional belt hook for hanging the tool on a work belt.
Guidance on securely mounting the tool to a Versatrack™ Trackwall system using the provided hook and screw.
Troubleshooting steps for a unit that fails to start, checking battery installation and charge.
Solutions for battery pack charging issues, including checking charger connection and temperature.
Diagnosing abrupt shutoffs due to overheating, temperature, or battery depletion.
