Craftsman 875.199850 User Manual

Owner's Manual
Pneumatic 3/4"Anvil Drive
IMPACT WRENCH
Model No.
875.199850
WARNING:
Before operating tool, read this
manual and follow all
Safety Recommendations and
Operating Instructions.
Safety
, Warranty
Features & Operation
Maintenance
, EspaSol
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
www.Sears.com

Craftsman 875.199850 Specifications

General

Voltage	19.2 V
Drive Size	1/4 inch
Maximum Torque	1400 in-lbs
Max Torque	1400 in-lbs
Chuck Type	Quick Release Hex Chuck

Summary

Safety Instructions

Wear Eye and Hearing Protection

Mandates impact-resistant eye protection meeting ANSI Z87.1 and recommends hearing protection for noise levels 85dBA or higher.

Vibration and Pressure Limits

Advises against prolonged vibration exposure and sets the maximum air pressure at 90 PSI.

Socket and Air Supply Guidelines

Warranty Information

Features and Specifications

Maintenance Procedures

Tool Lubrication

Recommends an in-line filter-regulator-lubricator for tool life and sustained operation.

Troubleshooting Guide

Tool Runs Slowly or Will Not Operate

Addresses issues like grit, lack of oil, low air pressure, hose leaks, and worn motor components.

Impacts Slowly or Will Not Impact

Troubleshoots lack of lubrication, incorrect regulator settings, or low air pressure.

Impacts Rapidly But Will Not Remove Bolts

Points to a worn or broken impact mechanism as the cause for rapid operation without effective fastening.

Does Not Impact