To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 875.198641 and is the answer not in the manual?
General| Voltage | 20V |
|---|---|
| Battery Type | Lithium-Ion |
| Chuck Size | 1/4 inch |
| Drive Size | 1/4 inch |
| Chuck Type | Quick Release |
Ensure eye protection meets ANSI Z87.1 standards for impact resistance and proper fit.
Use hearing protection if noise levels equal or exceed 85dBA for an 8-hour average exposure.
Discontinue use if experiencing tingling, numbness, or pain in hands/arms due to vibration.
Tool operates at 90 PSI max; higher pressure causes injury or tool damage.
Use only sockets designated for impact wrenches to prevent hazardous flying pieces.
Operates at 90 PSI; lower pressure reduces performance, higher pressure causes damage.
In-line filter-regulator-lubricator recommended for tool life and sustained operation.
Use air tool oil or high-grade turbine oil with specific additives for optimal performance.
Apply oil to air inlet and run tool for 30 seconds before/after each use.
