Do you have a question about the Craftsman 875.168820 and is the answer not in the manual?
Brand | Craftsman |
---|---|
Model | 875.168820 |
Category | Impact Driver |
Language | English |
Details the ideal applications and advantages of the 1/2" Square Drive Impact Wrench.
Lists key operational parameters including drive size, speed, torque, weight, and air requirements.
Outlines recommended compressor tank sizes for light, typical, and heavy use scenarios.
Covers essential safety practices including reading instructions, eye protection, and hearing protection.
Specifies the 90 PSI maximum and the risks of exceeding it, including injury and tool failure.
Warns against loose attire, jewelry, and unsecured hair becoming caught in moving parts.
Provides guidance on safe trigger use, attachment security, air line protection, and tool pointing.
Emphasizes using proper accessories, checking hoses, avoiding PVC pipes, and chemical hazards.
Highlights warnings related to tool maintenance, lubrication discharge, and using impact-rated sockets.
Illustrates the recommended connection of air hoses, lubricator, regulator, and filter to the compressor.
Advises clearing air hoses and selecting appropriate hose sizes and fittings for optimal performance.
Provides tips for installing hard piping in home shops, including sloping, drainage, and material choice.
Explains how to adjust the power regulator, use forward/reverse settings, and avoid prolonged impacting.
Stresses the importance of in-line lubricators and proper air tool oil for tool life and operation.
Details the procedure for lubricating the impact mechanism and front bearing annually or as needed.
Provides a detailed diagram and a list of all parts with their corresponding reference numbers.
Addresses issues like grit, lack of oil, low air pressure, hose leaks, and pressure drops.
Diagnoses problems such as slow impacts, rapid impacts without bolt removal, or no impact.
Explains how to handle water in the tank or lines and recommends installing a water separator filter.