Craftsman 2000 Series User Manual

1
* Product you purchased may vary from picture shown
USER MANUAL
F2136
© 2018, Craftsman, 701 E. Joppa Road, Towson, MD 21286
• Periodically, the surfaces should be cleaned with a mild deter-
gent and water.
• Autowaxwillpreservetheunit’slusternish.Applythewaxfol-
lowing the instructions provided by the wax manufacturer. The
wax will also help protect the unit against scratches.
• Grease and oil can be removed with most standard cleaning
uids.Forsafety,useanonammablecleaninguid.
MAINTENANCE
CAPACITIES
• The maximum weight for each shelf should be no more than
50 lbs., evenly distributed.
• The maximum static load rating, including contents, should be
no more than 250 lbs.
DIRECT ALL INQUIRIES TO CRAFTSMAN CUSTOMER
SERVICE AT 888-331-4569. Outside the United States call your
local distributor. Please provide the Model Number when calling.
LOCATING MODEL # INFORMATION
Model numbers and other information required for service parts is
located on a label on the interior right side.
SERVICE PARTS
WARNING: To reduce the risk of
injury, user must read instructions before using
product.

Craftsman 2000 Series Specifications

General

Brand	Craftsman
Model	2000 Series
Category	Enclosure
Language	English

Summary

Service Parts

Locating Model Number Information

Model numbers and service part information are located on a label on the interior right side.

Capacities

Maintenance

Safety

Hazard Definitions

Defines DANGER, WARNING, and CAUTION levels for potential hazards.

Safety Precautions and Warnings

Details essential safety rules for product use, installation, and handling to prevent injury.

Warranty Information

Ten Year Limited Warranty Details

Outlines the terms of the ten-year limited warranty, including coverage and exclusions.

Assembly Instructions

Step 1: Attach Back Panel to Side Panel

Connects side panel and back panel using screws and nuts, securing the initial frame structure.

Step 2: Connect Assemblies

Joins previously assembled sections using screws and nuts, finger tightening for initial connection.

Step 3: Attach Top Panel

Secures the top panel to the assembly using bolts, screws, washers, and nuts.

Step 4: Install Shelves

Inserts and attaches shelves to the unit, ensuring slots face the back for proper placement.

Step 5: Attach Bottom Panel

Connects the bottom panel to the main assembly using bolts, screws, washers, and nuts.

Step 6: Install Leveling Feet

Attaches four leveling feet to the base of the cabinet for stability and height adjustment.

Step 7: Attach Doors and Magnet

Mounts the doors using screws and attaches a magnet to hold the right door closed.

Step 8: Install Grommets

Places grommets into the holes at the back of the cabinet for wire management or protection.

Step 9: Mount Cabinet to Wall

Secures the cabinet to a wall stud using a mounting bracket, screws, and nuts for safety.

Operation

Shelf Adjustment

Instructions for emptying, removing fasteners, rotating, and repositioning shelves.

Leveling Foot Adjustment

Guidance on adjusting the leveling feet using a screwdriver or wrench for desired positioning.