EasyManua.ls Logo

Craftsman 247.203721 - User Manual

Craftsman 247.203721
68 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
perator's
I:RnFrSMAN°
T1200 LAWN TRACTOR
420cc, Variation Speed
42" Deck
Model No. 247.203721
• Espanol, P. 36
This product has a low emission engine which operates differently
from previously built engines. Before you start the engine, read and
understand this Operator's Manual.
Before using this equipment,
read this manual and follow
all safety rules and operating
instructions.
For answers to your questions about
this product, call:
1-888-331-4569
CraftsmanTractorHelpLine
7 am = 7 pm CT, Mort. =Sun.
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
Visit our website: www.craftsman.com FormNo.769-09448A
(January21,2014)

Table of Contents

Questions and Answers

  • A
    Alexander LopezAug 16, 2025
    Why does my Craftsman Lawn Mower engine run erratically?
    • K
      Kaitlin WilkersonAug 16, 2025
      If your Craftsman Lawn Mower engine runs erratically, it could be due to several reasons: * The unit might be running with the CHOKE activated. Deactivate the CHOKE. * Spark plug wires might be loose. Connect the spark plug wires. * The fuel line might be blocked, or the fuel is stale. Replace the fuel line, fill the tank with clean, fresh gasoline, and replace the fuel filter. * The vent in the gas cap might be plugged. Clear the vent or replace the cap if damaged. * There might be water or dirt in the fuel system. Drain the fuel tank and refill it with clean, fresh gasoline. * The air cleaner might be dirty. Replace the air cleaner paper element or clean the foam pre-cleaner, if equipped.
  • R
    Robin GarciaAug 20, 2025
    How to fix an uneven cut with my Craftsman 247.203721?
    • A
      Alec GarciaAug 20, 2025
      If your Craftsman Lawn Mower is producing an uneven cut, here are a few things to check: * The deck might not be leveled properly. Perform a side-to-side deck adjustment. * The blade might be dull. Sharpen or replace the blade. * The tire pressure might be uneven. Check the tire pressure in all four tires.
  • N
    Nicholas WoodsAug 25, 2025
    Why does my Craftsman Lawn Mower engine idle rough?
    • K
      Karen JacksonAug 25, 2025
      If your Craftsman Lawn Mower engine idles roughly, consider the following: * The spark plug might be fouled, faulty, or have a gap that is too wide. Replace the spark plug and set the plug gap. * The air cleaner might be dirty. Replace the air cleaner element and/or clean the pre-cleaner.
  • W
    Walter JoyceAug 27, 2025
    Why is my Craftsman 247.203721 Lawn Mower not mulching grass?
    • J
      Jill ButlerAug 27, 2025
      If your Craftsman Lawn Mower isn't mulching grass properly, consider these potential causes: * The engine speed might be too low. Place the throttle in the FAST (rabbit) position. * The grass might be wet. Avoid mulching when the grass is wet. * The grass might be excessively high. Mow once at a high cutting height, then mow again at the desired height or make a narrower cutting swath. * The blade might be dull. Sharpen or replace the blade.
  • M
    Marvin FoxAug 31, 2025
    What to do if my Craftsman Lawn Mower engine overheats?
    • M
      Mary DuncanAug 31, 2025
      If your Craftsman Lawn Mower engine overheats, it could be due to: * Low engine oil level. Fill the crankcase with the proper amount and weight of oil. * Restricted airflow. Clean grass clippings and debris from around the engine’s cooling fins and housing.
  • J
    Jonathan AtkinsonSep 4, 2025
    Why is my Craftsman 247.203721 Lawn Mower vibrating excessively?
    • M
      Miranda BerrySep 4, 2025
      If your Craftsman Lawn Mower has excessive vibration, it could be due to: * A loose or unbalanced cutting blade. Tighten the blade and spindle. * A damaged or bent cutting blade. Replace the blade.
  • M
    Mckenzie MasseySep 8, 2025
    What causes a Craftsman Lawn Mower engine to hesitate at high RPM?
    • E
      Elizabeth BarnettSep 8, 2025
      If your Craftsman Lawn Mower engine hesitates at high RPM, it might be because the spark plug gap is too close. Remove the spark plug and reset the gap.
  • T
    Thomas WilliamsonNov 11, 2025
    Why won't my Craftsman Lawn Mower start?
    • O
      orobbinsNov 12, 2025
      If your Craftsman Lawn Mower engine fails to start, there are several potential causes: * The PTO/Blade Engage lever might be engaged. Ensure it is in the disengaged (OFF) position. * The parking brake might not be engaged. Engage the parking brake. * Spark plug wires might be disconnected. Connect the wires to the spark plugs. * The Throttle/Choke control lever might not be in the correct starting position. Place it in the FAST position. * The choke might not be activated. Move the Throttle/Choke lever into the Choke position. * The fuel tank might be empty or contain stale fuel. Fill it with clean, fresh gasoline (less than 30 days old). * The fuel line might be blocked. Replace the fuel line and fuel filter. * The spark plugs might be faulty. Clean, adjust the gap, or r...

Summary

Warranty Information

Craftsman Full Warranty

Details the full warranty coverage for Craftsman riding equipment against defects.

Safety Instructions

General Operation Safety

Slope Operation Safety

Guidelines for safely operating the tractor on inclines and slopes.

Child Safety Precautions

Precautions to protect children from hazards associated with the tractor.

Fuel Handling Safety

Safe practices for handling gasoline to prevent fire and explosion risks.

Assembly

Attaching Battery Cables

Step-by-step guide for connecting the tractor's battery cables.

Steering Wheel Installation

Operation

Key Controls and Functions

Details the operation of parking brake, throttle, ignition, seat, and pedals.

Shift Lever Operation

Brake Pedal Function

Fuel and Oil Fill-up

Procedure for adding gasoline and checking engine oil.

Safety Interlock System

Explanation of the safety system preventing operation under unsafe conditions.

Engaging Parking Brake

Setting Cutting Height

Starting and Stopping the Engine

Instructions for safely starting and stopping the tractor's engine.

Driving the Tractor

Basic guidelines for operating and driving the tractor.

Driving on Slopes Safely

Critical safety advice for operating the tractor on sloped terrain.

Engaging Cutting Blades

Procedure for engaging the tractor's cutting deck blades.

Mowing Best Practices

Service and Maintenance

Maintenance Schedule

Overview of recommended maintenance tasks and intervals.

Engine Oil and Filter Service

Procedures for checking, changing engine oil, and replacing the oil filter.

Fuel Filter Replacement

Air Cleaner Maintenance

Spark Plug Service

Cutting Deck Removal

Cutting Blades Maintenance

Procedures for removing, sharpening, and balancing cutting blades.

Belt Replacement Procedures

Troubleshooting

Engine Start Issues

Diagnosing and fixing problems with the engine failing to start.

Engine Running Problems

Emission Control Warranty Statement

Warranty Rights and Obligations

Explains the owner's and manufacturer's responsibilities for emission warranties.

Manufacturers Warranty Coverage

Details the duration and scope of the emission control system warranty.

Owners Warranty Responsibilities

General Emissions Warranty

Craftsman 247.203721 Specifications

General IconGeneral
BrandCraftsman
Model247.203721
CategoryLawn Mower
LanguageEnglish

Related product manuals