EasyManua.ls Logo

Craftsman 247.20372 series - User Manual

Craftsman 247.20372 series
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operator’s Manual
T1000 SERIES
LAWN TRACTORS
Model Nos. 247.20370*, 247.20371*, 247.20372*,
247. 20 37 7 *, 247. 20 373*, 247. 20 374*, 247. 20 375*,
247. 20 376* & 247. 20 379 *
For answers to your questions about
these products, call:
1-888-331-4569
Craftsman Customer Hot Line
This product has a low emission engine which operates differently
from previously built engines. Before you start the engine, read
and understand this Craftsman Operator’s Manual and the Engine
Operator’s Manual.
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
Visit our website: www.craftsman.com
CAUTION
Before using this equipment,
read this manual and follow
all safety rules and operating
instructions.
Off-Season Storage ........................................................25
Troubleshooting ..............................................................26
Español............................................................34
Service Numbers ............................................Model/
Warranty Supplement
Safe Operation Practices .................................................2
Slope Gauge ...................................................................7
Assembly & Set-Up ..........................................................8
Controls & Operation .....................................................14
Service & Maintenance ..................................................20
Troubleshooting ...........................................................28
Español ........................................................................ 29
Warranty/Service ....................... See Separate Supplement
NOTE: This Operators Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the model
depicted may differ from yours.
* -- Last digit of model number varies
Form No. 769-11207
(October 13, 2015)

Questions and Answers

  • D
    Dr. Laura Hernandez MDAug 17, 2025
    How to fix uneven cut with Craftsman 247.20372?
    • W
      waynehaleAug 17, 2025
      An uneven cut with your Craftsman Lawn Mower can be caused by several factors. First, the deck might not be leveled properly, so perform a side-to-side deck adjustment. A dull blade can also contribute to an uneven cut, so sharpen or replace the blade. Finally, check the tire pressure in all four tires, as uneven tire pressure can also cause this issue.
  • J
    Joseph MackAug 21, 2025
    Why is my Craftsman 247.20372 engine overheating?
    • V
      victorlewisAug 21, 2025
      Your Craftsman Lawn Mower engine may be overheating due to a low engine oil level. Fill the crankcase with the proper amount and weight of oil. Another cause could be restricted airflow. Clean grass clippings and debris from around the engine’s cooling fins and housing.
  • M
    Maria GloverAug 25, 2025
    What to do if Craftsman 247.20372 Lawn Mower engine idles rough?
    • D
      Dana SmithAug 25, 2025
      If your Craftsman Lawn Mower engine idles rough, it could be due to a spark plug issue. The spark plug might be fouled, faulty, or have a gap that's too wide. Try replacing the spark plug and setting the correct gap. Another potential cause is a dirty air cleaner. In this case, replace the air cleaner element and/or clean the pre-cleaner.
  • C
    Carolyn HowardAug 28, 2025
    What to do if Craftsman 247.20372 Lawn Mower engine runs erratically?
    • A
      Anna OrtizAug 28, 2025
      If your Craftsman Lawn Mower engine is running erratically, it could be due to several reasons. First, check if the choke is activated and deactivate it. Next, ensure the spark plug wires are securely connected. A blocked fuel line or stale fuel could also be the culprit; in this case, replace the fuel line, fill the tank with clean, fresh gasoline, and replace the fuel filter. Additionally, check if the vent in the gas cap is plugged and clear it, or replace the cap if damaged. Water or dirt in the fuel system can also cause this issue, so drain the fuel tank and refill with clean, fresh gasoline. Lastly, a dirty air cleaner can lead to erratic engine performance, so replace the air cleaner paper element or clean the foam pre-cleaner if your mower is equipped with one.
  • C
    Carl CalderonSep 1, 2025
    Why Craftsman 247.20372 is not mulching grass?
    • W
      wjarvisSep 1, 2025
      Your Craftsman Lawn Mower might not be mulching grass effectively because the engine speed is too low, so place the throttle in the FAST position. Avoid mulching when the grass is wet. If the grass is excessively high, mow once at a high cutting height, then mow again at the desired height, or make a narrower cutting swath. A dull blade will also prevent effective mulching, so sharpen or replace the blade.
  • C
    Christopher RichardsonSep 5, 2025
    What causes excessive vibration in Craftsman Lawn Mower?
    • A
      Amber CuevasSep 5, 2025
      Excessive vibration in your Craftsman Lawn Mower may be caused by a loose or unbalanced cutting blade. Try tightening the blade and spindle. Alternatively, the cutting blade may be damaged or bent, requiring replacement.
  • D
    Denise BennettSep 9, 2025
    Why Craftsman 247.20372 engine hesitates at high RPM?
    • T
      Timothy ColeSep 9, 2025
      If your Craftsman Lawn Mower engine hesitates at high RPM, it could be due to the spark plug gap being too close. Remove the spark plug and reset the gap.
  • R
    rebecca50Nov 12, 2025
    Why Craftsman Lawn Mower engine fails to start?
    • S
      Sandra GuzmanNov 13, 2025
      Your Craftsman Lawn Mower engine might fail to start due to several reasons: * The PTO/Blade Engage lever might be engaged: place it in the disengaged (OFF) position. * The parking brake might not be engaged: engage the parking brake. * Spark plug wires might be disconnected: connect the wires to the spark plugs. * The throttle/choke control lever might not be in the correct starting position: place the lever into the FAST position. * The choke might not be activated: move the throttle/choke lever into the Choke position. * The fuel tank might be empty or contain stale fuel: fill the tank with clean, fresh gas (less than 30 days old). * The fuel line might be blocked: replace the fuel line and fuel filter. * The spark plugs might be faulty: clean, adjust the gap, or replac...

Summary

Safe Operation Practices

Slope Operation Safety

Precautions for operating the tractor on slopes to prevent tip-overs.

Children and Towing Safety

Guidelines for child safety and towing operations.

Assembly and Setup

Controls and Operation

Engine and Driving Controls

Controls for starting, stopping, speed, and direction.

Driving and Mowing Techniques

Procedures for operating the tractor and performing mowing tasks.

Service and Maintenance

Maintenance Schedule and Intervals

Recommended service tasks and their frequency.

Troubleshooting

Engine Starting and Running Issues

Solutions for engine not starting or running erratically.

Craftsman 247.20372 series Specifications

General IconGeneral
Power SourceGas
Engine Displacement140cc
Drive SystemRear-Wheel Drive
Speed ControlVariable Speed
Mulching CapabilityYes
Cutting Width21 inches
Cutting Height1.25 - 3.75 inch
Fuel Tank Capacity1.6 quarts
Warranty2-year limited

Related product manuals