EasyManua.ls Logo

Craftsman 247.203703 - User Manual

Craftsman 247.203703
68 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
Visit our website: www.craftsman.com
Operator’s Manual
T1000 LAWN TRACTOR
7 Speed, Shift-on-the-Go
42” Deck
Model No. 247.203703
For answers to your questions about
this product, call:
1-888-331-4569
Craftsman Customer Hot Line
This product has a low emission engine which operates differently
from previously built engines. Before you start the engine, read and
understand this Operator’s Manual.
• Espanol, P. 32
CAUTION
Before using this equipment,
read this manual and follow
all safety rules and operating
instructions.
Form No. 769-09446C
(January 19, 2015)

Table of Contents

Questions and Answers

  • D
    Daniel AllisonAug 15, 2025
    Why does my Craftsman Lawn Mower engine run erratically?
    • J
      John JohnsonAug 16, 2025
      If your Craftsman Lawn Mower engine runs erratically, it could be due to several reasons: * The unit might be running with the CHOKE activated. Deactivate the CHOKE. * Spark plug wires might be loose. Connect the spark plug wires. * The fuel line might be blocked, or the fuel is stale. Replace the fuel line, fill the tank with clean, fresh gasoline, and replace the fuel filter. * The vent in the gas cap might be plugged. Clear the vent or replace the cap if damaged. * There might be water or dirt in the fuel system. Drain the fuel tank and refill it with clean, fresh gasoline. * The air cleaner might be dirty. Replace the air cleaner paper element or clean the foam pre-cleaner, if equipped.
  • C
    Christopher GreeneAug 19, 2025
    How to fix an uneven cut with my Craftsman Lawn Mower?
    • B
      Benjamin MendezAug 19, 2025
      If your Craftsman Lawn Mower is producing an uneven cut, here are a few things to check: * The deck might not be leveled properly. Perform a side-to-side deck adjustment. * The blade might be dull. Sharpen or replace the blade. * The tire pressure might be uneven. Check the tire pressure in all four tires.
  • M
    mullinsjoshuaAug 23, 2025
    Why does my Craftsman 247.203703 engine idle rough?
    • S
      schneiderdonaldAug 23, 2025
      If your Craftsman Lawn Mower engine idles roughly, consider the following: * The spark plug might be fouled, faulty, or have a gap that is too wide. Replace the spark plug and set the plug gap. * The air cleaner might be dirty. Replace the air cleaner element and/or clean the pre-cleaner.
  • C
    colepetersonAug 27, 2025
    Why is my Craftsman Lawn Mower not mulching grass?
    • W
      whitebrandonAug 27, 2025
      If your Craftsman Lawn Mower isn't mulching grass properly, consider these potential causes: * The engine speed might be too low. Place the throttle in the FAST (rabbit) position. * The grass might be wet. Avoid mulching when the grass is wet. * The grass might be excessively high. Mow once at a high cutting height, then mow again at the desired height or make a narrower cutting swath. * The blade might be dull. Sharpen or replace the blade.
  • M
    Matthew HoweAug 31, 2025
    What to do if my Craftsman Lawn Mower engine overheats?
    • E
      Erika LongAug 31, 2025
      If your Craftsman Lawn Mower engine overheats, it could be due to: * Low engine oil level. Fill the crankcase with the proper amount and weight of oil. * Restricted airflow. Clean grass clippings and debris from around the engine’s cooling fins and housing.
  • T
    Timothy RobertsSep 3, 2025
    Why is my Craftsman 247.203703 Lawn Mower vibrating excessively?
    • B
      brett82Sep 3, 2025
      If your Craftsman Lawn Mower has excessive vibration, it could be due to: * A loose or unbalanced cutting blade. Tighten the blade and spindle. * A damaged or bent cutting blade. Replace the blade.
  • D
    Dr. Carlos WhitakerSep 7, 2025
    What causes a Craftsman Lawn Mower engine to hesitate at high RPM?
    • L
      Laura JohnsonSep 7, 2025
      If your Craftsman Lawn Mower engine hesitates at high RPM, it might be because the spark plug gap is too close. Remove the spark plug and reset the gap.
  • S
    Sandra FosterNov 11, 2025
    Why won't my Craftsman Lawn Mower start?
    • V
      Vickie SpearsNov 11, 2025
      If your Craftsman Lawn Mower engine fails to start, there are several potential causes: * The PTO/Blade Engage lever might be engaged. Ensure it is in the disengaged (OFF) position. * The parking brake might not be engaged. Engage the parking brake. * Spark plug wires might be disconnected. Connect the wires to the spark plugs. * The Throttle/Choke control lever might not be in the correct starting position. Place it in the FAST position. * The choke might not be activated. Move the Throttle/Choke lever into the Choke position. * The fuel tank might be empty or contain stale fuel. Fill it with clean, fresh gasoline (less than 30 days old). * The fuel line might be blocked. Replace the fuel line and fuel filter. * The spark plugs might be faulty. Clean, adjust the gap, or r...

Summary

Safety Instructions

General Operation Safety

Read, understand, and follow all instructions for safe operation of the tractor.

Slope Operation Guidelines

Guidelines and warnings for operating on slopes to prevent tip-overs and accidents.

Gasoline Handling Safety

Procedures for safe handling of gasoline to prevent fire and explosion hazards.

Slope Gauge Usage

Instructions on how to use the slope gauge for safe operation assessment.

Assembly

Attaching Battery Cables

Connect the positive and negative battery cables correctly for safe operation.

Attaching the Steering Wheel

Instructions for securely attaching the steering wheel to the tractor.

Attaching the Seat

Steps to properly attach and position the tractor seat for comfort.

Tire Pressure Recommendations

Recommended tire pressure for optimal operation and safety.

Operation

Control Lever Overview

Identifies and explains the function of major controls on the tractor.

Starting and Stopping the Engine

Procedures for starting and stopping the engine using the ignition switch.

Driving and Braking

Instructions for driving, shifting gears, and using the brake.

Engaging Cutting Blades

How to engage and disengage the cutting blades (PTO).

Service and Maintenance

Maintenance Schedule

Overview of recommended maintenance tasks and intervals for the tractor.

Engine Oil and Filter Care

Procedures for checking and changing engine oil and filter.

Air Filter and Spark Plug Service

Instructions for servicing the air filter and spark plug.

Deck Leveling Adjustments

How to adjust the cutting deck for proper front-to-rear and side-to-side balance.

Off-Season Storage

Preparing the Engine for Storage

Steps to prepare the engine for storage, including fuel treatment.

Fuel System Draining

Procedures for draining the fuel tank for safe storage.

Tractor Preparation for Storage

Cleaning and lubricating the tractor for storage.

Troubleshooting

Emission Control Warranty

Warranty Overview

Explains warranty rights, obligations, and coverage for emission systems.

Manufacturers Coverage Details

Details the duration and scope of the emission control system warranty.

Owner Responsibilities

Outlines owner duties for maintenance and presenting equipment for repair.

Covered Warranted Parts

Lists specific emission-related parts covered by the warranty.

Repair Protection Agreement

Craftsman 247.203703 Specifications

General IconGeneral
BrandCraftsman
Model247.203703
CategoryLawn Mower
LanguageEnglish

Related product manuals